1. <rt id="64zkl"><progress id="64zkl"></progress></rt>
    <cite id="64zkl"></cite>
  2. <cite id="64zkl"><pre id="64zkl"></pre></cite>
      <source id="64zkl"><meter id="64zkl"></meter></source>
    1. <b id="64zkl"></b>
      <cite id="64zkl"><tbody id="64zkl"><delect id="64zkl"></delect></tbody></cite>
      您好!歡迎光臨東莞市橫瀝旭裕德機械設備廠網站!
      您的位置: 首頁 > 產品中心 > 松棉機

      產品中心

      服務熱線

      18820307561

      公司實力

      松棉機

      松棉機(開棉機、打棉機、纖維梳松機)

      產品介紹

       

      1:用途用于二維\三維螺絲棉、PP棉、公仔棉、普通中空棉進行均勻開散蓬松,一次性開松,適合玩具廠、沙發廠、床上用品廠、服裝廠、纖維制品廠開松使用。

      2:特點、利用一個大棍筒和多個小棍筒旋轉咬合,主棍1400轉/分鐘低轉速運行,將原棉進行高達上萬次的梳松整理,且不損傷原棉,其最大的優點,開松三維螺絲棉一次性開松率高達99%以上,而且不會損傷棉花。

      3:采用自動送棉裝置,操作安全簡便,連續作業時間長,維修率低;全機采用高溫烤漆,不易生銹。

      4:無縫鋼管主棍筒,加數個小棍筒結合作業,開槽纏繞專用齒條,主棍筒已做高速電子動平衡處理,左右誤差僅為0.1-1克,保證機器運行更加平穩無震動,并且機器整體使用壽命更長,維護成本更低。該機體積小,質量高,使用壽命長,維修率低,產量比同類提高60%。

      5:可安裝金屬探測報警裝置,遇到金屬物體(2mm以上)進入松棉機,就會馬上報警,停機并自動從輸送帶倒出來,避免金屬物體損壞機身內的鋼齒。

      適用產品:3D-25D纖維棉的開松梳理及熱風棉,針棉,噴膠棉等纖維產品的邊角料再次開松。

       

       

      型號

      XYDSM-360

      XYDSM-560

      XYDSM-790

      規格

      2200x720x920mm

      2200x920x920mm

      2200x1160x1070mm

      電源

      380V   50HZ

      功率

      4kw+0.75kw

      4kw+0.75kw

      5.5kw+0.75kw

      產量

      50-100kg/h

      120-200kg/h

      200-350kg/h

      開松率

      99%以上

      重量

      440kg

      480kg

      580kg

       

      型號

      XYDSM-1000

      XYDSM-1200

      XYDSM-1500

      規格

      2200x1350x1140mm

      3150x1600x1220mm

      3150*1900*1220mm

      電源

      380V   50HZ

      功率

      7.5kw+0.75kw

      7.5kw+0.75kw

      11kw+0.75kw

      產量

      300-450kg/h

      450-580kg/h

      580-680kg/h

      開松率

      99%以上

      重量

      650kg

      800kg

      1000kg

       


      Cotton Loosening Machine

      Product Introduction

       

      1. Suitable for loosening of 2D/3D Screw cotton, Polypropylene cotton, Doll Cotton and Hollow cotton. The loose cotton can then be used in products such as toys, sofa, bedding, textiles and other fiber products.

      2. This machine features a main mixture tube connected to many other small mixture tubes. The main mixture tube will rotate at a low speed of 1400 RPM for as much as 10,000 times to loosen the cotton while not damaging the cotton itself. This product can loosen 99% of 3D Screw cotton just once while not damaging the cotton itself.

      3. This machine is equipped with an automated cotton feeder mechanism, which allows simple and safe operation. It allows prolonged operation with low failure rate. The entire machine is treated with high heat resistance paint and not easily prone to rust.

      4. The main mixture tube is connected to various small mixture tube without gap. The rotational mechanism is equipped with dedicated gear rack. It is weight balance at high speed, with only 0.1-1g allowance. This assures that the machine operates at minimum vibration while increasing the operation lifespan and reduce the need for frequent maintenance. Comparing with other similar product, it can produce 60% higher yield.

      5.  It is possible to install metal detector within the machine. Upon detecting metal objects(>2mm) entering the machine, the detector will trigger an alarm and stop the machine. It will also automatically reverse out the load to prevent the metal object damaging the gears in the machine.

      Suitable for: Loosening of 3D-25D fibre cotton, hot air cotton, polyester wadding and reused scrap material.

       

      Model

      XYDSM-360

      XYDSM-560

      XYDSM-790

      Dimension

      2200x720x920mm

      2200x920x920mm

      2200x1160x1070mm

      Power Input

      380V   50HZ

      Power

      4kw+0.75kw

      4kw+0.75kw

      5.5kw+0.75kw

      Yield

      50-100kg/h

      120-200kg/h

      200-350kg/h

      Loosening Rate

      Above 99%

      Weight

      440kg

      480kg

      580kg

       

      Model

      XYDSM-1000

      XYDSM-1200

      XYDSM-1500

      Dimension

      2200x1350x1140mm

      3150x1600x1220mm

      3150*1900*1220mm

      Power Input

      380V   50HZ

      Power

      7.5kw+0.75kw

      7.5kw+0.75kw

      11kw+0.75kw

      Yield

      300-450kg/h

      450-580kg/h

      580-680kg/h

      Loosening Rate

      Above 99%

      Weight

      650kg

      800kg

      1000kg

      最新資訊

      網站首頁 充棉機定制 產品中心 應用領域 關于我們 工廠設備 聯系我們 新聞資訊
      咨詢服務熱線
      聯系電話:
      188-2030-7561
      聯系人:李先生
      微信號:188-2030-7561
      地址:廣東東莞市橫瀝鎮山廈村上東路36號
      Copyright ? 2022 東莞市橫瀝旭裕德機械設備廠 版權所有,違權必究 技術支持【東莞網站建設 粵ICP備2020092992號GMAP】【BMAP】【后臺管理】【返回頂部
      日本暧暧做免费高清视频,亚洲人成99,最新更新国产区 观看,日韩欧美中文字幕2019,小说区Av网站|青娱极品盛宴国产分类|黑人欧美日韩专区在线