羽絨棉開松機（超細纖維開松機）

產品介紹

1、該機型利用一個大輥筒和多個小輥筒旋轉咬合（加密針布），大輥筒1400轉/分鐘低轉速運行，小輥筒300轉/分鐘轉速，將原棉進行高達上萬次的梳松整理，且不損傷原棉；一次性開松率98%以上。

2、采用自動送棉裝置，操作安全簡便，連續作業時間長，維修率低。

3、無縫鋼管主輥筒，加多個小輥筒結合作業，纏繞加密針布，主輥筒已做高速電子動平衡處理，左右誤差僅為0.1-1克，保證機器運行更加平穩無震動，并且機器整體使用壽命更長，維護成本低。

4：可安裝金屬探測報警裝置，遇到金屬物體（2mm以上）進入松棉機，就會馬上報警，停機并自動從輸送帶倒出來，避免金屬物體損壞機身內的鋼齒。

適用產品：0.7D-3D纖維棉的開松梳理。

適用范圍：羽絨服、羽絨枕、羽絨被、玩具、沙發等。

Feather Loosing Machine

Product Introduction

1. The product features a main mixture tube connected to various adjacent turning small mixture tube with carding cloth. The main mixture tube will rotate at a rate of 1400 RPM with the small mixture tubes at 300 RPM, combing the raw cotton up to 10,000 times without damaging the cotton. The product is capable of loosening raw cotton up to the rate of 99% at a single operation without damaging the cotton.

2. It utilizes automatic feeding mechanism, which will ensure prolonged and safety operation with minimum maintenance.

3. The main mixture tube is connected to various small mixture tube without gap with carding cloth. The rotational mechanism is equipped with dedicated gear rack. It is weight balance at high speed, with only 0.1-1g allowance. This assures that the machine operates at minimum vibration while increasing the operation lifespan and reduce the need for frequent maintenance.

4. It is possible to install metal detector within the machine. Upon detecting metal objects(>2mm) entering the machine, the detector will trigger an alarm and stop the machine. It will also automatically reverse out the load to prevent the metal object damaging the gears in the machine.

Suitable for Products: 0.7D – 3D fibre cotton and loosening and combing operations

Usage scope : Feather jacket , feathered pillow, feathered blanket, toys, sofa and others.